Fujitsu BS2000 User Manual

Managing units of the SE server Managing hardware
240 U41855-J-Z125-3-76
10.1.6.2 Managing the IP configuration of the SU x86
You manage the IP configuration of the SU x86 using the associated Management menu, IP
configuration tab.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (SU<x86>) →
Management, IP configuration tab.
Using the IP configuration tab you can change the host name and network properties and
add network addresses.
The functionality of the tab is the same as that for the MU (see section “Managing the IP
configuration” on page 208) with the following restriction:
i If only the standard networks LOCLAN, MCNLO, and MCNPR are assigned on the
SU x86, the buttons for changes are not enabled.
10.1.6.3 Managing routing of the SU x86
You manage routing of the SU x86 using the associated Management menu, Routing & DNS
tab.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (SU<x86>) →
Management, Routing & DNS tab.
The routing is displayed in the upper Routing group on the tab.
The functionality of the tab is the same as that for the MU (see section “Managing routing
of the Management Unit” on page 210) with the following restriction:
i The MANPU and MONPU networks are not available on an SU x86.
The Add new route and Delete route actions are only available for Net-Storage
connections.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English