Managing hardware Managing IP networks
U41855-J-Z125-3-76 275
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
10.2.5.2 Information on the performance and utilization of the ports of the private
management networks
An overview of the performance and utilization of the ports belonging to the selected private
management network is provided by the Performance tab.
Ê For the MCNPR or MONPR<nn> networks: Select Hardware → IP networks →
Management Network Private → <network>, Performance tab. Here <network> specifies
the private management network MCNPR or MONPR<nn>.
Ê For the MCNLO or MSNPR networks: Select Hardware → IP network → Management
Network Private → [<se server>(SE<model>) →] <network>, Performance tab. Here
<network> specifies the private management network MCNLO or MSNPR. Since these
networks are server-specific, they are always assigned to a <se server>(SE<model>)
menu if they are part of a Management Cluster.
The Performance tab is similar for all Management Networks Private. The ISL performance
view and Unit performance view tables are displayed. Detailed information is provided in
section “Information on the performance and utilization of the DANPU ports” on page 263.
10.2.5.3 Managing members of optional MONPR networks
You can add or remove ports for each optional MONPR (MONPR01, MONPR02, etc.):
Ê Select Hardware → IP networks → Management Network Private → MONPR<no>, Overview
tab.
Adding ports
Ê Select the
Net Unit information group and click Add ports.
The Add ports dialog box opens. Follow the instructions of the wizard and select the
ports.
Ê Confirm the action in the last step with Add.
Removing a port
Ê In the Net Unit information group, click the Delete icon by the required unit and
confirm the action.
To Next Page
Loading...
Need help?
General