Managing applications SE management applications
U41855-J-Z125-3-76 157
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k07
7.1 SE management applications
SE Management applications execute on the Management Units and are fully integrated
into the SE Manager. For details, see section “Management applications”.
The following SE management applications currently exist:
● BS2000 Backup Monitor is a permanent part of the SE Manager
● Storage Manager is a preinstalled add-on pack (in the Hardware → Storage menu, see
section “Managing storage systems” on page 281).
The following optional SE management applications can be installed as add-on packs:
● openUTM WebAdmin (see page 159)
● ROBAR (see page 159)
● openSM2 (see chapter “Performance überwachen” on page 163)
If the administered SE server configuration has more than one MU (SE server with
redundant MU or two SE servers in a Management Cluster), every installation of these SE
management applications is listed in the tree structure, with the exception of the BS2000
backup monitor. The name of the MU on which the application is installed is given in
brackets after the name of the application. In the table of SE management applications, the
name of the respective MU is listed in the Management Unit column.
openUTM WebAdmin, ROBAR and openSM2 are chargeable products, each with its own
online help, which are realized as add-on packs.
7.1.1 BS2000 Backup Monitor
The BS2000 Backup Monitor monitors backup requests which have been submitted in the
BS2000 systems of the SE server configuration using the software products HSMS and
FDDRL. Whether or which information of a BS2000 system is transferred to the BS2000
Backup Monitor is controlled by an HSMS or FDDRL parameter.
To Next Page
Loading...
Need help?
General