Fujitsu BS2000 User Manual

Managing authorizations Configuration
U41855-J-Z125-3-76 309
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.48 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k11
12.2 Configuration
The Authorizations → Configuration menu is used to manage the access to an LDAP server,
which provides centrally managed accounts for use on an SE server as well as IP based
access restrictions to the MUs.
12.2.1 Access to an LDAP server
The LDAP tab enables you to configure and edit the access to an LDAP server on which
the LDAP accounts are managed that can be released for the MUs of the SE server.
i In a Management Cluster, you can configure one LDAP server per SE server. Two
redundant MUs in one SE server share the same LDAP server.
The LDAP server and the MU(s) must synchronize their time via the same NTP
server.
Ê In the tree structure select Authorizations → Configuration, LDAP tab.
On the LDAP tab, the configuration data of the currently configured LDAP server are
displayed. The Status field informs you whether the LDAP configuration was activated
or only created.
i In a Management Cluster, the configurations for each SE server are displayed in
individual groups. The LDAP configuration is SE server-specific, but in the default
mode it is configured for both SE servers together (i.e. both get the same
configuration). For more information on the LDAP configuration in the Management
Cluster, see the "Cluster Solutions for SE Servers" whitepaper [8].

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English