U41855-J-Z125-3-76 323
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.48 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k13
13 Managing logging functions
The Logging menu comprises the functions for central management of the audit and event
logging and the configuration of the alarm management of the SE server configuration.
i In a multi-MU configuration, the following must be observed when displaying audit
logging records and events on an MU:
In normal operation, the displayed entries are the same at each MU.
However, if an MU is not available during the generation of an entry (e.g. switched
off), the entry cannot be propagated to that MU. Because of that, the displayed
entries and the date of the oldest entries can differ between the MUs.
Especially the MUs in a Management Cluster will always show differences.
13.1 Displaying audit logging
The logging records from the audit logging are displayed in the Audit Logging tab.
Audit logging logs every action that is executed on a Unit (MU, SU, HNC) of the SE server
configuration via the SE Manager, an add-on or a CLI command. This enables you as
administrator to trace at all times who performed which action and when.
To Next Page
Loading...
Need help?
General