Managing FC networks Managing hardware
278 U41855-J-Z125-3-76
10.3.2 Configuring settings
You can add, change or remove switches.
Ê Select Hardware → FC networks, Settings tab. The Settings tab with all information on FC
networks opens.
Adding, changing, removing switches
Ê To add a switch, in the Registered switches group click Add switch. In the Add switch wizard
you can make the required entries step by step.
Ê To change a switch, in the Registered switches group click the Change icon by the required
switch, follow the instructions of the subsequent wizard, and confirm the changes.
Ê To remove a switch, in the Registered switches group click the Remove icon by the required
switch and confirm the action in the subsequent dialog box.
Enabling/disabling switch check
Ê In the Registered switches group click the Enable check or Disable check icon by the
required switch and confirm the request.
To Next Page
Loading...
Need help?
General