Managing hardware Managing units of the SE server
U41855-J-Z125-3-76 241
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
10.1.6.4 Displaying the DNS configuration of the SU x86
You can inquire information about the DNS configuration of the SU x86 using the
associated Management menu, Routing & DNS tab.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (SU<x86>) →
Management, Routing & DNS tab.
The Routing & DNS tab displays the DNS configuration in the lower group DNS configuration.
The structure of the tab is basically the same as that for the MU (see section “Managing the
DNS configuration” on page 211).
10.1.6.5 Configuring Net-Storage on the SU x86
Access to Net-Storage (storage access via NFS) is possible for BS2000 systems (for Native
BS2000 and the BS2000 VMs) of the SU x86 provided the prerequisites are fulfilled in
X2000.
– For administrative access to the Net-Storage server that provides the Net-Storage, the
administrator of the Net-Storage server must create an account that is the owner of the
directory released via NFS. In the case of Eternus-CS HE NAS, the account must be
the owner of the file group of the NAS share. The user ID and group ID must be obtained
from the administrator of the Net-Storage server.
The NFSv4 domain must correspond to the domain name set on the Net-Storage
server.
i X2000 always tries to connect to the Net-Storage via NFSv4. If the mounting via
NFSv4 fails, NFSv3 is used as protocol.
– Each Net-Storage connection must be configured in the network.
You configure Net-Storage in X2000 of the SU x86 using the Management menu, Net-Storage
tab.
To Next Page
Loading...
Need help?
General