Managing logging functions Alarm management
U41855-J-Z125-3-76 327
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.48 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k13
13.3 Alarm management
As administrator, you can use the Alarm management tab to configure rules for the automatic
messaging in case of events on the units of the SE server configuration. There are two
possible types of messages:
● A management station can be informed via SNMP trap. Traps are unsolicited messages
of the SNMP agent.
● A user can be informed via e-mail.
You decide which servers are informed via SNMP trap and which users are informed via e-
mail. You decide for each receiver, which weight an event must have to trigger a message.
Ê Select Logging → Alarm management, Alarm management tab.
The Alarm management tab contains information on the receivers of messages via SNMP
trap, the e-mail configuration and the receivers of messages via e-mail.
To Next Page
Loading...
Need help?
General