Architecture and strategies Software of the SE server
U41855-J-Z125-3-76 25
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k02
HNC
HNC is the basic software of the HNC. It provides, among other things, the following
functions:
● Network connection for the BS2000 systems of the SU /390
● Configuration of the Net-Storage for the BS2000 systems of the SU /390
Add-on packs
In addition to the standard software M2000, X2000, and HNC, the SE server offers
enhancements by means of add-on packs.
The possible installation of add-on packs on the MU enables costs and maintenance to be
avoided on the SE server for additional servers, e.g. for ROBAR or openSM2. See also
section “Add-on pack” on page 27.
2.2.2 Software status, system version and update status
In addition to the system version, the software status also includes the updates which are
installed on the unit. Software updates can only be installed if they are available on the local
system.
Under SW version in the system information the SE Manager displays on the MU, SU x86,
and HNC the version of the basic software M2000, X2000 or HNC, including the update
status.
On the SU /390 the SE Manager displays the HCP (Hardware Control Program) software
(e.g. in the SU /390 information on page 201), but in this case does not support update
management.
The software status consequently has the following components:
Component Example Description
Version 6.2A
Revision REV=0100 Update status
Security fix 6.2A, No.001 – Security fixes are assigned to a version and update
status.
– Security fixes have a sequence number for each
version status and each update status (001 in the
example)
Hot fix 6.2A, REV=0100,
A0603507-H03
– Hot fixes are assigned to a version and update status
– In their name hot fixes contain a problem message
number (A0603507 in the example) and a sequence
number (H03 in the example)