Managing a cluster Managing an SU Cluster
U41855-J-Z125-3-76 297
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.48 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k12
11.3 Managing an SU Cluster
An SU Cluster combines SUs of the same type (SU /390 or SU x86), which enable the Live
Migration (LM) for BS2000 systems from one SU to another.
If an LM is currently possible (calling the wizard in the Operation main window of the
respective BS2000 system), depends on the current status of the SU Cluster.
In order to avoid unwanted fault indications and events over long periods when
maintenance takes place (e.g. SU switched off or in error status), the SU cluster can be
temporarily deactivated. You can use the checkmark icon to activate or deactivate an SU
Cluster.
Ê Select Cluster → <cluster-name>, SU Cluster tab.
In the example, the SU Cluster tab shows the current state of an SU Cluster with SU /390.
A detailed description of the cluster functionality is provided in the "Cluster Solutions for SE
Servers" whitepaper [8].
To Next Page
Loading...
Need help?
General