Working in XenVM operation Systems on Server Units
134 U41855-J-Z125-3-76
5.6.3 Tracking VM installation
The operating system of the XenVM is installed from the defined installation source before
the initial startup. On the VM installation tab you can query the status of the installation
process required to do this at any time. The installation log can also be viewed at any time.
This enables any errors which have occurred to be analyzed.
If the installation process has not yet been completed for a XenVM, this is also displayed
as a supplement to the VM status in the overview of the XenVMs and in the operating menu
of the XenVM
If the installation process has not yet been completed for a XenVM, this is also displayed
as a supplement to the VM status in the overview of the XenVMs and on the Operation tab
of the XenVM
Detailed information on the VM installation tab is provided in the SE Manager help.
Ê In the tree structure select Systems → [<se server>(SE<model>) →] <unit> (SU<x86>) →
Virtual machines → XenVM, VM installation tab.
The VM installation tab displays the XenVMs and the installation history.
The information displayed is described in the SE Manager help.
Ê Select one of the following actions for VM installation:
Detailed information on these actions is provided in the SE Manager help.
Ê Aborting the installation process
This action is not available for installation processes which have already been
terminated (Installation status FINISHED, CANCELED, FA I L E D or CLOSED).
Ê Click the Abort icon to abort the installation process.
A new installation process can be started for the XenVM with Start XenVM (see
section “Starting and shutting down the XenVM” on page 139).
To Next Page
Loading...
Need help?
General