Working in VM2000 mode Systems on Server Units
128 U41855-J-Z125-3-76
Tape devices tab
This tab enables you to assign further tape devices individually to the BS2000 VM or to
remove tape devices from it.
The Tape devices tab lists all tape devices which are assigned to the BS2000 VM.
i The link to IORSF file management link and the Unit column are displayed for SU /
390 only.
Ê Click Assign tape device to assign another tape device individually to the BS2000 VM.
Ê Click the Remove icon by a tape device to remove the tape device from the BS2000 VM.
Ê Click Management of tape devices to branch to the hardware device management, see
section “Managing tape devices” on page 181.
All devices tab
This tab enables you to assign or remove further BS2000 devices to or from the BS2000
VM on a cross-type basis. In other words the assignment or removal applies for sets of
devices which are defined via MN lists, MN areas or MNs with wildcards.
To Next Page
Loading...
Need help?
General