Managing BS2000 devices Managing devices
180 U41855-J-Z125-3-76
i Information on the generated LAN devices on SU /390
The devices are displayed only if the active IORSF file has the status "File
transferred".
– Entries of the type IORSF display devices which are generated exclusively in
the IORSF.
– Entries of the type LOCLAN and ZASLAN display the LAN devices already
defined. If the device is also generated in the IORSF, a valid channel path
identifier is displayed under CHPID. Otherwise only a warning icon is displayed
under CHPID, and the device must still be generated (in BS2000 with /ADD-IO-
UNIT).
i In VM2000 mode the table contains an additional column: if a device assignment
exists, the Assigned column displays the VM.
The LAN tab offers the following functionality for managing the LAN devices:
Add new LAN device
Ê Click Add new LAN device.
In the Add LAN device wizard you can specify the required properties of the LAN device step
by step.
Restart LAN device
The restart allows you to rectify a problematical situation which affects the device.
Ê By the required device click the Restart icon and confirm the action.
Removing a LAN device
Ê Click the Remove icon by the required LAN device and confirm the action.
To Next Page
Loading...
Need help?
General