Introduction Changes since the last edition of the manual
U41855-J-Z125-3-76 17
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.46 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k01
● Event logging
Events in the SE server configuration are logged with a weighting. The logging includes
events triggered by the StorMan add-on.
● Alarm management
The administrator can configure the automatic messaging (via SNMP trap or E-Mail)
that is triggered for events from a certain weighting.
● For BS2000 devices, the number of free licenses is displayed.
● For SU /390, an emergency system is provided. For this purpose, two emulated disks
are provided on the MU.
● For AU PQ with Oracle VM Server, the SE Manager enables direct access to the Oracle
VM console.
As of Service Pack 1 of the basic software M2000 / X2000 / HNC V6.2A, the following
changes result:
● Additional AU models are supported:
– the PRIMERGY-based AU25 M4
– the PRIMEQUEST-based AUQ38E and DBU38E
● With regard to the hardware basis, AUs are generally distinguished by AU PY
(PRIMERGY-based) and AU PQ (PRIMEQUEST-based).
● For SU / 390 the dialog box Initiate IMPL / Change BS2000 operation mode is now available
in the BS2000 operating mode tab in the Actions group. The dialog permits you to initiate
the IMPL and optionally to change the operation mode. After the execution of the IMPL,
a BS2000 IPL is always initiated.
● For SU / 390, the BS2000 operation mode tab and the VM menus Disks, KVP, LAN and
Tape devices now also provide links for managing the IORSF files in the Devices menu.
● For Audit Logging and Event Logging in the main menu Logging, a new calendar function
facilitates the entry of date and time, if the time period for the displayed entries should
be changed.
To Next Page
Loading...
Need help?
General