Managing XenVM devices on Server Unit x86 Managing devices
194 U41855-J-Z125-3-76
Creating a virtual switch
Ê Click Create new virtual switch (above the table).
In the Create virtual switch wizard you can specify the required properties of the virtual
switch step by step.
The virtual switch is created and then displayed in the table of virtual switches. You can now
use this virtual switch to configure virtual Network Interface Cards.
Removing a virtual switch
You can remove a virtual switch from the configuration if it is not used for network
connections. This means that no virtual Network Interface Cards may be assigned to the
switch.
Ê Click the Delete icon by the required virtual switch and confirm the action.
The selected virtual switch is immediately removed from the configuration. In the case of
an external virtual switch, the assigned LAN interfaces are once more freely available.
To Next Page
Loading...
Need help?
General