Fujitsu BS2000 User Manual

Managing hardware Managing units of the SE server
U41855-J-Z125-3-76 215
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k10
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (MU) → Management,
System time tab:
The System time tab displays the NTP servers which are entered for automatic time
synchronization and the local time of the MU.
Adding or removing an NTP server
Ê To add an NTP server, click Add NTP server in the Time synchronization with NTP server
group, and after making the necessary entries confirm the action.
Ê To remove an NTP server from the NTP configuration, click the Remove icon by the
required NTP server in the Time synchronization with NTP server group and confirm the
action.
Changing the local time
You can only change the local time if no NTP server is active.
i Changes to the time can also have an effect on productive operation. See also
section “Effect on the time setting of the systems on the SE server” on page 214".
Ê In the Local time group click the Change icon, and after making the necessary entries
confirm the action.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English