Fujitsu BS2000 User Manual

Networks Architecture and strategies
32 U41855-J-Z125-3-76
The following logical networks are supported:
– Data Network Public
– Data Network Public (DANPU): when required, up to 8 additive networks
DANPU<n> (where <n>= 01..08) can be configured for connecting applications to
the public customer network.
– Data Network Private
– Data Network Private (DANPR): when required, up to 99 networks DANPR<n>
(where <n>= 01..99) can be configured for internal private customer networks for
SE servers.
– Public management networks
– Management Admin Network Public (MANPU) for administrative access to the MU,
BS2000 systems and AUs
– Management Optional Network Public (MONPU): the additive administration
network can be configured when required (e.g. when AIS Connect is not to be
operated via MANPU but over a separate network).
– Management Network Private
– Management Control Network Local (MCNLO) for the local SE server
communication
– Management Control Network Private (MCNPR) for SE server communication
– Management Optional Network Private (MONPR): when required, up to 8 additive
networks MONPR<n> (where <n>= 01..08) can be configured for SE server
communication.
– Management SVP Network Private (MSNPR) enables SVP communication to the
SU /390 on SE700/SE500
In addition to the connections of the units to the switches of the Net Unit, direct cabling from
the units to the customer network can also be used.
The SE Manager provides a graphical display of the network topology with all the network
components and connections of the SE server in the Topology tab of the Hardware → IP
networks menu. See section “Graphical display of the internal IP network topology” on
page 257.

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English