Fujitsu BS2000 User Manual

Architecture and strategies Virtualization
U41855-J-Z125-3-76 59
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:25.47 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.k02
● Linux/Windows pool
This pool exists only if a XenVM license is installed and when sufficient CPUs are
available. It is used exclusively by XenVMs.
● Depending on the hardware and licenses which are installed, further unused real CPUs
can exist in the Server Unit outside the pools, the so-called free CPUs.
The CPU pools are also visible under VM2000, but the naming of static pools is retained in
VM2000 for compatibility reasons. The table below shows the names of the CPU pools in
the X2000 basic system and the names in VM2000.
In normal operation enough CPUs are available for every pool. A lack of CPUs can occur
in the following exceptional situations:
● Reduced operation: a hardware failure means that fewer CPUs are operational at
system startup.
● Abnormal operation: a change of license means that more CPUs are required.
CPU pool Users Name in X2000 Name in VM2000
Pool 0 X2000
Pool 0
*POOL0
Standard BS2000 pool BS2000
bs2_pool
co_bs2_pool
1
1
For CPUs which are not attached. These are as a rule the CoD CPUs (which are called extra CPUs in VM2000)
*STDPOOL
Pool configured in VM2000 BS2000
<name 1..8>
co_<name 1..8>
1
<name 1..8>
Linux/Windows pool XenVM
lw_pool
*FOREIGN
Free CPUs (not a pool)
Table 3: Overview of the CPU pools (X2000 and VM2000 views)

Fujitsu BS2000 Specifications

General

Brand	Fujitsu
Model	BS2000
Category	Server
Language	English