Field Value
ternal SNMP accesses.
Possible values:
• 3: SNMP Version 1
• 3: Community-Based SNMP Version 2
• 3': SNMP Version 3
3, 3 and 3' are active by default.
If no option is selected, the function is deactivated.
SNMP Lists UDP Port The UDP port ( ) at which the device receives SNMP re-
quests is displayed here.
The value cannot be changed.
Tip
If your SNMP Manager supports SNMPv3, you should use this version is possible as
older versions transmit all data unencrypted.
5.5 Remote Authentication
This menu contains the settings for user authentication.
5.5.1 RADIUS
RADIUS (Remote Authentication Dial In User Service) is a service that enables authentica-
tion and configuration information to be exchanged between your device and a RADIUS
server. The RADIUS server administrates a database with information about user authen-
tication and configuration and for statistical recording of connection data.
RADIUS can be used for:
• Authentication
• Accounting
• Exchange of configuration data
For an incoming connection, your device sends a request with user name and password to
Funkwerk Enterprise Communications GmbH
5 System Management
funkwerk W1002/W2002/WIx040/WIx065 99
To Next Page
Loading...
Need help?
General
