Funkwerk W1002 User Manual

11.1.2 DNS Test
Fig. 97: Maintenance -> Diagnosis ->DNS Test
The DNS test is used to check whether the domain name of a particular host is correctly re-
solved. The Output Results field shows the DNS test messages. The DNS test is started
by entering the domain name to be tested in DNS Address and clicking on the Go button.
11.1.3 Traceroute Test
Fig. 98: Maintenance -> Diagnosis ->Traceroute Test
You use the traceroute test to display the route to a particular address (IP address or do-
main name), if this can be reached. The Output field shows the traceroute test messages.
11 Maintenance Funkwerk Enterprise Communications GmbH
184 funkwerk W1002/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English