Field Value
Syslog Entries internally in the device.
Possible values are to .
The default value is . You can view the stored messages in
Monitoring -> Internal Log.
Maximum Number of Ac-
counting Log Entries
Enter the maximum number of accounting entries that are
stored internally in the device.
Possible values are to .
The default value is .
5.2.2 Passwords
Setting the passwords is another basic system setting.
Fig. 44: System Management -> Global Settings-> Passwords
Note
All funkwerk devices are shipped with the same user names and passwords. As long
as the password remains unchanged, they are not protected against unauthorised use.
Make sure you change the passwords to prevent unauthorised access to the device
If the password is not changed, under System Management-> Status appears the
warning: "System password not changed!"
5 System Management Funkwerk Enterprise Communications GmbH
84 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
