4.3.2 The Setup Tool for experts
The Setup Tool is a menu-controlled ASCII tool for the configuration and administration of
your device and, in addition to the SNMP commands, also allows access to all the configur-
ation parameters.
To start the Setup Tool, you can be connected to the device in any way you like: It does not
matter whether you connect to the device via the LAN or via a serial connection.
Proceed as follows to start a Setup Tool session:
(1) Log in to your device as (see Logging in for Configuration on page 56).
(2) Enter ! after the input prompt and press Return.
The main menu of the ASCII Setup Tool opens.
Setup Tool menu
The main menu may differ from device to device, depending on the configuration level of
your device. Every Setup Tool menu contains three areas:
• The menu line contains a navigation aid to show you where you currently are in the
Setup Tools menu system. The system name of your device is also displayed. This is es-
pecially helpful if you are using several funkwerk devices with different system names.
• The configuration window is where the actual entries are made and the respective set-
tings displayed. The field in which the cursor is currently located is shown with inverted
colours.
• The help line tells you how to move around in the current menu, which entries you can
change or which values are possible for an entry.
Basically, a menu looks like this:
4 Access and Configuration Funkwerk Enterprise Communications GmbH
70 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
