Funkwerk W1002 User Manual

5.2.1 System
The System Management -> Global Settings -> System menu is used for entering the
basic system data of your device.
Fig. 43: System Management -> Global Settings-> System
The System Management -> Global Settings -> System menu consists of the following
fields:
Fields in the Basic Parameters menu
Field Value
System Name Enter the system name of your device. This is also used as the
PPP host name.
A character string of up to 255 characters is possible.
The device type is entered as the default value.
Location Enter the location of your device.
Contact Enter the relevant contact person. Here you can enter the e-
mail address of the system administrator, for example.
A character string of up to 255 characters is possible.
The default value is .
Maximum Number of Enter the maximum number of syslog messages that are stored
Funkwerk Enterprise Communications GmbH
5 System Management
funkwerk W1002/W2002/WIx040/WIx065 83

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English