The System Management -> Global Settings-> System Licenses -> New menu consists
of the following fields:
Fields in the Basic Parameters menu
Field Value
Licence Serial Number Enter the licence serial number you received when you bought
the licence.
Licence Key Enter the licence key you received by e-mail.
Note
If -" 8 is displayed as the status:
• Enter the licence data again.
• Check your hardware serial number.
If -" !!" is displayed as the status, you have entered a licence for a sub-
system that your device does not support. This means you cannot use the functions of
this licence.
You can also deactivate licences if you do not want to use them.
Proceed as follows to deactivate a licence:
(1) Go to System Management -> Global Settings-> System Licenses.
(2) Press the icon in the line containing the licence you want to delete.
(3) Confirm with OK.
The licence is deactivated. You can reactivate your additional licence at any time by enter-
ing the valid licence key and licence serial number.
5.3 Interface Mode / Bridge Groups
In this menu, you define the operation mode for your device's interfaces.
Funkwerk Enterprise Communications GmbH
5 System Management
funkwerk W1002/W2002/WIx040/WIx065 91
To Next Page
Loading...
Need help?
General
