The System Management -> Global Settings -> Passwords menu consists of the follow-
ing fields:
Fields in the System Password menu
Field Value
System Admin Pass-
word
Enter the password for the user name .
This password is also used with SNMPv3 for authentication
(MD5) and encryption (DES).
Confirm Admin Pass-
word
Confirm the password by entering it again.
Fields in the SNMP Communities menu
Field Value
SNMP Read Community Enter the password for the user name .
SNMP Write Community Enter the password for the user name 4.
Fields in the Global Password Options menu
Field Value
Show Passwords and
Keys in Clear Text
Define whether the passwords are to be displayed in clear text
(plain text).
The function is activated with 4 !,5.
The function is not activated by default.
If you activate the function, all passwords and keys in all menus
are displayed and can be edited in plain text.
The WLAN and IPSec keys are one exception here. They can
only be entered in plain text. If you press OK or call the menu
again, they are displayed as asterisks (*).
5.2.3 Date and Time
You need the system time for tasks such as correct timestamps for system messages, or
accounting.
Funkwerk Enterprise Communications GmbH
5 System Management
funkwerk W1002/W2002/WIx040/WIx065 85
To Next Page
Loading...
Need help?
General
