Fig. 45: System Management -> Global Settings-> Date and Time
You have the following options for determining the system time:
• You can determine the system time automatically, e.g. using various time servers. To en-
sure that the device uses the desired current time, you should configure one or more time
servers.
• You can set the system time manually on the device.
Note
If a method for automatically deriving the time is defined on the device, the values ob-
tained in this way automatically have higher priority. A manually entered system time is
therefore overwritten.
The System Management -> Global Settings-> Date and Time menu consists of the fol-
lowing fields:
Fields in the System Time menu
Field Description
Current System Time The current date and current system time are displayed here.
The entry cannot be changed.
5 System Management Funkwerk Enterprise Communications GmbH
86 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
