Configuration and maintenance
The access points are configured using the Funkwerk Configuration Interface . This con-
figuration interfaces offers all options in clear menus, which are needed for both basic and
advanced configuration of the access point. Important data for maintenance and error dia-
gnosis can also be clearly displayed and easily accessed.
1.2 About this guide
Area of validity
This document is valid for funkwerk devices with system software as of software version
7.6.1.
The Reference, which you have in front of you, contains the following chapters:
User's Guide - Reference
Chapter Description
Quick Install Guide
This contains instructions for how to set up and start up your
device and create a basic configuration (see Quick Install Guide
on page 7).
Technical Data
This section contains a description of all the device's technical
properties.
Access and Configura-
tion
This includes explanations about the different access and con-
figuration methods.
System Management
Physical Interfaces
LAN
Wireless LAN
Routing
Local Services
Maintenance
External reporting
Monitoring
All the configuration options are described in this chapter. The
chapters are arranged in the same sequence as the navigation
menus in the Funkwerk Configuration Interface .
The individual chapters also contain general explanations on
the subsystem in question.
1 Introduction Funkwerk Enterprise Communications GmbH
4 funkwerk W1002/W2002/WIx040/WIx065