Property Value
cast can be deactivated
WEP key length (bit) 40 (64) or 104 (128)
Software supplied
ComPoint Manager
BOSS operating system
Printed documentation
supplied
Quick Install Guide
Safety precautions
R&TTE Compliance Information
Online documentation User's Guide
Antenna Diversity
Note
The two antennas have different functions. One is used both to transmit and receive
(known as the "main" antenna), the other is only used to receive. During reception, the
AP (Access Point) checks which antenna is receiving a better signal. This is then used
for decoding. Since the two antennas are approximately one wavelength apart, the dif-
ference in signal strength can be quite considerable.
3.3.3 LEDs
By means of the eight LEDs, you can see the wireless status, wireless activity, Ethernet
activity and LED states of your device. The LED states are indicated by combinations of the
LEDs which are explained in detail in this chapter.
They are arranged as follows:
3 Technical Data Funkwerk Enterprise Communications GmbH
46 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
