Field Value
Possible values are whole numbers between and .
The default value is . To prevent Status being set to , set
this value to .
RADIUS Dialout Only for Authentication Type = "0"".
Select whether your device receives requests from RADIUS
server dialout routes. This enables temporary interfaces to be
configured automatically and your device can initiate outgoing
connections that are not configured permanently.
The function is activated by choosing 7#,.
The function is not activated by default.
If the function is active, you can enter the following options:
• @, 2"3, Enter the time period in seconds
between the update intervals.
The default entry here is i.e. an automatic reload is not car-
ried out.
• 4," 6 : This is the shared password
used for communication between the RADIUS server and
your device.
5.5.2 TACACS+
TACACS+ permits access control for your device, network access servers (NAS) and other
network components via one or more central servers.
Like RADIUS, TACACS+ is an AAA protocol and offers authentication, authorisation and
accounting services (TACACS+Accounting is currently not supported by funkwerk devices).
The following TACACS+ functions are available on your device:
• Authentication for login shell
• Command authorisation on the shell (e.g. telnet, setup. show)
TACACS+ uses TCP port 49 and establishes a secure and encrypted connection.
In the System Management -> Remote Authentication -> TACACS+ menu, a list of all
registered TACACS+ servers is displayed.
5 System Management Funkwerk Enterprise Communications GmbH
104 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
