Funkwerk W1002 User Manual

Fig. 83: Local Services -> DHCP Server ->DHCP Relay Settings
The Local Services -> DHCP Server -> DHCP Relay Settings menu consists of the fol-
lowing fields:
Fields in the Basic Parameters menu
Field Description
Primary DHCP Server Enter the IP address of a server to which BootP or DHCP re-
quests are to be forwarded.
Secondary DHCP Serv-
er
Enter the IP address of an alternative BootP or DHCP server.
10.3 Scheduling
Your device has a event scheduler, which can be used to execute certain standard actions
(activation or deactivation of interfaces) on a time-dependent basis.
Note
To run the event scheduler, the date configured on your device must be 1.1.2000 or
later.
10.3.1 Time Schedule
In the Local Services -> Scheduling -> Time Schedule menu, a list of all scheduled tasks
is shown.
10 Local Services Funkwerk Enterprise Communications GmbH
166 funkwerk W1002/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English