Funkwerk W1002 User Manual

6.2.1 Relay configuration
In this menu, you can configure the port mode.
Fig. 53: Physical Interfaces-> Relay-> Relay Configuration
The Physical Interfaces -> Relay-> Relay Configuration menu consists of the following
fields:
Fields in the General menu
Field Description
Port mode
Possible values:
• 8 (default value) The relay is manually set to always open.
• 8: The relay is manually set to always closed.
• , ,5: The relay is automatically coupled with the
red error LED.
6 Physical Interfaces Funkwerk Enterprise Communications GmbH
110 funkwerk W1002/W2002/WIx040/WIx065

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English