Field Description
New Filename
Only for Action = @: Enter the new name of the configur-
ation file.
11.3 Reboot
11.3.1 System Reboot
In this menu, you can trigger an immediate reboot of your device. Once your system has
restarted, you must call the Funkwerk Configuration Interface again and log in.
Pay attention to the LEDs on your device. For information on the meaning of the LEDs, see
the Technical Data chapter of the manual.
Note
Before a reboot, make sure you confirm your configuration changes by clicking the
Save Configuration button, so that these are not lost when you reboot.
Fig. 100: Maintenance -> Reboot ->System Reboot
If you wish to reboot your device, enable the option Are you sure you want to reboot the
system now? You press the OK button to start the reboot.
Funkwerk Enterprise Communications GmbH
11 Maintenance
funkwerk W1002/W2002/WIx040/WIx065 189
To Next Page
Loading...
Need help?
General
