EasyManuals Logo

Funkwerk W1002 User Manual

Funkwerk W1002
271 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
Field Description
carded.
Possible values are to .
The default value is D.
Long Retry Limit Enter the maximum number of attempts to send a data packet
of length less than or equal to the value defined in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
Possible values are to .
The default value is &.
Fragmentation
Threshold
Enter the maximum size as of which the data packets are to be
fragmented (i.e. split into smaller units). A low value is recom-
mended for this field in areas with poor reception and in the
event of radio interference.
Possible values are  to '&.
The default value is '& bytes.
CCA Mode Here, you select the method used to find a free channel (CCA =
Clear Channel Assessment).
Possible values:
74 /0 0,: If the signal strength does not exceed the
value of ED Threshold, the channel counts as free, whereby
only the field strength is important and not the type of signal.
+  : Only genuine wireless signals are con-
sidered in a particular frequency range, not their strength.
("0 : ED Threshold and Carrier Sense are applied.
The default value is ("0.
ED Threshold Here, you can define the Energy Detection threshold for CCA
(Clear Channel Assessment).
Possible values are &D&'& to &D&'&D.
The default value is .
8 Wireless LAN Funkwerk Enterprise Communications GmbH
126 funkwerk W1002/W2002/WIx040/WIx065

Table of Contents

Other manuals for Funkwerk W1002

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Funkwerk W1002 and is the answer not in the manual?

Funkwerk W1002 Specifications

General IconGeneral
BrandFunkwerk
ModelW1002
CategoryWireless Access Point
LanguageEnglish

Related product manuals