cept connections from this port.
The funkwerk bridges have transmission rates far above the possibilities of the ISDN S0,
ISDN S2M or ADSL. The high-speed bridge bridge even surpasses standard Ethernet
(10BaseT, 10Base2, 10Base5).
Caution
Never connect two bridges that have set up a connection to each other with radio to
the same LAN segment. This leads to unavoidable overloading of your network and
stops all network traffic.
Some of the possible network topologies are described here to give you an overview of the
options available when you use funkwerk bridges:
Fig. 65: Point-to-point topology
8 Wireless LAN Funkwerk Enterprise Communications GmbH
140 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
