Field Description
This field specifies the interface of your device on which discov-
ery is carried out.
MAC Address The value of this field can only be read.
This field specifies the MAC address of the discovered access
point.
Node Name You can change the name of the discovered access point here.
IP Address You can change the IP address of the discovered access point
here.
Netmask You can change the related netmask here.
You must enter the administrator password for the access point
here, otherwise you cannot carry out the configuration opera-
tion.
Gateway Address You can change the address of the gateway here.
Last Write Result The value of this field can only be read.
This field displays the result of the last configuration operation.
Possible values:
• - 7: The access point reported a successful operation
or a configuration change has not yet been made with OK.
• - @ ! : The access point has not responded.
• 4: The access point reported an authorisation
error. Check the authentication password.
• 23, 2 " : There is a problem with the in-
tended IP parameters (IP address, netmask, or gateway ad-
dress).
• 4 "" 60#,: The access point cannot be
reached for internal reasons (e.g. the interface to which the
access point is connected is down). A configuration request
cannot be sent to the access point.
• 8"0 7: The access point responds to the config-
uration request with an unexpected or non-specific error.
Funkwerk Enterprise Communications GmbH
10 Local Services
funkwerk W1002/W2002/WIx040/WIx065 181
To Next Page
Loading...
Need help?
General
