Field Description
interfaces is sent
Send Information to Select where your device sends the UDP packets.
Possible values:
• ,, 2 A# "C (default value): The de-
fault value means that the broadcast ad-
dress of the first LAN interface is used.
• $, : ": The UDP packets are sent to the entered IP
address.
Update Interval Enter the update interval (in seconds).
Possible values are to .
The default value is .
UDP Destination Port Enter the port number for the Windows application Activity
Monitor.
The default value is D (registered by IANA - Internet As-
signed Numbers Authority).
Password Enter the password for the Activity Monitor.
Funkwerk Enterprise Communications GmbH
12 External Reporting
funkwerk W1002/W2002/WIx040/WIx065 199
To Next Page
