Fig. 118: Monitoring -> WLAN -> Client Links->
Values in the list Client Links
Field Description
AP MAC Address Shows the MAC address of the client link partner.
Uptime Shows the time in hours, minutes and seconds for which the cli-
ent link in question is active.
Signal dBm Shows the received signal strength in dBm.
Noise dBm Shows the received noise strength in dBm.
SNR dB Shows the signal quality in dB.
Data Rate Mbps Shows the current transmission rate of data received on this cli-
ent link in Mbps.
Rate Shows separately, for each of the stated data rates, the values
for Tx Packets and Rx Packets.
13 Monitoring Funkwerk Enterprise Communications GmbH
212 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
