(a) Place the CD provided in the CD-ROM drive of your configuration PC. The installation
wizard should start automatically. If it does not, open the following file on the CD using
your file browser:.
(b) Follow the instructions in the installation wizard.
Then carry out the following steps to configure an IP address for your device:
(1) Start the ComPoint Manager from the Windows Start menu: Start -> Programs ->
funkwerk -> ComPoint Manager.
The following dialog box appears:
Fig. 13: ComPoint Manager initial screen
The ComPoint Manager detects the devices installed in the network.
(2) In the list, double click the MAC address of the device you want to configure.
If you do not know the MAC address of the device: A label containing the most im-
portant device data, including the MAC address, is attached to the device.
The following dialog box appears:
Funkwerk Enterprise Communications GmbH
2 Quick Install Guide
funkwerk W1002/W2002/WIx040/WIx065 19
To Next Page
Loading...
Need help?
General
