Furuno FELCOM501 - Page 134

6. SETTINGS ON WEB INTERFACE
6-24
7. Click the [Next] button.
8. Referring to the table below, set up the WAN connection settings.
9. Click the [Finish] button.
The message "The group registration was successful. Set the firewall, IP filter and
DNS filter as necessary." appears.
10. Click the [Close] button to close the message.
To set up the "Firewall", "DNS Filter" and "IP Filter"settings, see the relevant sections.
• Firewall: section 6.8.5
• DNS Filter: section 6.8.6
• IP Filter: section 6.8.7
Item Description
Connection Type Shows "PPPoE".
Group Name Shows the registered group name.
APN Put a [9] in the box to use Access Point Name in the SIM card.
Use ASC II characters (other than “, ’) for the names of connec-
tion destinations (maximum 100 characters).
APN Username Input the user name specified by provider (maximum 50 char-
acters). Ok to leave blank.
APN Password Input the password specified by provider (maximum 50 charac-
ters). Ok to leave blank.
Auto disconnection Put a [9] in the box(es) for the following disconnect condition(s)
to automatically disconnect the group’s line as necessary.
• Data size - Standard Data: Input the automatic disconnect
data size of the standard data.
• Connection time - Streaming Data: Input the connection time
of the streaming data.
• No communication from LAN to WAN: Input the waiting time
when there is no transmission data.
• Blocking: Input the limit time that cannot communicate with
the satellite.
Prev button Return to the previous step while keeping the setting informa-
tion.
Finish button Register the setting information, then go to the [Group] menu.