Revision 14
101 August 02, 2019
5.10 Streams Tab
5.10.1 Overview
The Streams tab (Figure 5-19) is used to configure the analyzer to perform the desired
analyses. The format of this tab will depend on the number of streams that are present in the
system and the configuration shown in Figure 5-19 corresponds to a system with 4 streams
that is capable of measuring H
2
S and total sulfur and presents the tab to edit parameters
related to the H
2
S concentration for stream 1 (the tab for total sulfur is identical). The tabs for
each stream are identical and can be edited in the same manner.
Figure 5-21: Stream Tab - H
2
S Tab
To Next Page
Loading...
