Revision 14
15 August 02, 2019
1.6 Contents of this Manual
This manual contains the following information:
• Section 1: ProTech903 H
2
S and Total Sulfur Analyzer presents introductory information
about the system and the mode of operation.
• Section 2: Analyzer Components describes the design of the major components of the
system.
• Section 3: Installation describes unpacking the analyzer, installing it in the facility and
interfacing with other devices.
• Section 4: Operating the System via the Handheld Keypad describes how the user enters
data and views system parameters using the hand held controller module and on board
display panel
• Section 5: Graphical User Interface (GUI) presents a detailed discussion of the various
aspects of the application program on the personal computer.
• Section 6: Operating the System describes how to set up the system to perform analyses.
• Section 7: Maintenance includes a discussion of activities which should be performed on a
routine basis to optimize operation
• Section 8: Troubleshooting and Service presents information that is useful in diagnosing
problems with the analyzer and describes how various components are replaced.
• Section 9: Analyzer Q.C. Documentation includes the test documentation material used to
test the analyzer
• Section 10: ProTech903 H
2
S Analyzer Wiring Book includes diagrams to assist the
operator in interfacing auxiliary components such as relays, solenoids, etc. to the controller
module.
• Section 11: Technical Specifications presents the specifications for the analyzer.
• Section 12: Spare Parts lists a number of items which may be required to maintain
operation of the analyzer.
To Next Page
Loading...
