Revision 14
178 August 02, 2019
11.4 Instrument Specifications
28”Hx16”Wx16”D (71 cm x 41 cm x 41 cm)
Class 1 Div 1 80 lb 36.4 kg
Class 1 Div 2 40 lb 18.2 kg
250W @ 120 AC (Total sulfur option)
Power Input Dual power design - Universal 90-
230VAC
and 10-
36VDC input. Capable of being
attached
to redundant power supply
Class 1, Div 1, Group B,C&D
Class 1, Div 2, Group B,C&D
0-50°C (without enclosure)
Dual processor design with intelligent
colorimetric sensor. To achieve greatest
sensitivity sens
or uses 24 bit AD converter
equipped with temperature monitor on sensor
block. Sensor automatically calibrates on every
cycle to prevent drift.
Optical tape counter optimizes tape usage and
provides exact measurement of tape used.
User can program low tape alerts/alarms.
Real time clock for accurate event time
stamping.
Windows based software for configuration and
monitoring. Software includes advanced
configurable features for stream switching,
automatic calibration, multi mode H2S and total
sulfur
measurement, reference and zero gas
test, and multi-ranging.
Permeable membrane humidifier system
facilitates faster response time and eliminates
moisture carry-over to lead acetate tape.
Memory Field programmable memory
Firmware for unit can be upgraded in the field.
Data Logging Up to 10 months of H2S
concentration data logs. 512 Kbytes non-
volatile memory for data logging and audit trail.
Total sulfur system, dilution system, high
pressure sampling system, solar power, back
panel, low pressure sensor, low hydrogen
sensor, auto-
cal, and enclosure / cabinets
(temperature
Up to 0-500ppm with no dilution; up to 0-100%
with permeation dilution system
2
S or total sulfur). Please
consult factory for more information.
To Next Page
Loading...
