Concord 4
Installation Manual
2
About this manual
This manual provides information for planning, installing, programming, and testing this security system.
When necessary, this manual refers you to other documentation with compatible peripherals.
Planning sheets are included for you to record hardware layout and software programming settings.
The Concord 4 User Manual (466-2183) contains user worksheets that you should fill out during the
installation and programming of the system. For multiple-partition systems, we suggest a User Manual for
each partition.
Special installation requirements
This security system also functions as a fire warning system, an intrusion alarm system, an emergency
notification system, or any combination of the three.
Some installations may require configurations dictated by city/state codes, insurance, or Underwriter’s
Laboratories (UL). This section describes the various component and configuration listings.
UL listed installations
This section describes the requirements for UL listed installations.
Basic system
• Control panel (600-1021-95R Concord 4 RF, 600-1022-95R Concord Express V4, 600-1040 Concord
Commercial V4, or 600-1042 Concord 4 Hybrid).
• Standard class 2 16.5 VAC, 40 VA power transformer 22-145 (600-1023) or 22-145-CN (600-
1023-CN), or power line carrier class 2 16.5 VAC, 40 VA power transformer 22-149 (600-1024) or
22-149-CN (600-1024-CN). You must order these transformers separately from GE Security.
• Backup battery 12 V 4.5 or 5.0 Ah (60-681) or 12V 7 AH (60-680).
•SuperBus
®
2000 fixed display touchpad (60-820), FTP 1000 (600-1020), 2x16 LCD touchpad (60-
746-01), ATP1000 (60-983), ATP2100 (60-985), ATP 2600 (60-984), 2x20 LCD touchpad (60-803), or
2x20 VFD touchpad (60-804).
• Interior speaker siren (60-528), hardwired interior siren (13-949), or speaker siren (13-060).
• Basic system may also include a SuperBus 2000 RF receiver (60-764-95R-01) or a SuperBus
transceiver (600-1025-01-95R).
To Next Page
Loading...
Need help?
General
