GE Security Concord 4 Installation Manual

Chapter 3
Programming
45
Tier 2 programming menus
This section guides you through the following programming tier 2 menu items as they appear in sequence:
• Security menu on page 46
• Phones menu on page 53
• Phone options menu on page 59
• Timers menu on page 65
• Light control menu on page 70
• Touchpad options menu on page 71
• Reporting menu on page 73
• Siren options menu on page 83
• Sensors menu on page 85
• Audio verification menu on page 89
• Accessory modules menu on page 93
• Onboard options menu on page 99
• Macro keys menu on page 102
Each menu on tier 2 represents a group of settings related to the menu name. Some tier 2 menus break down
into settings that affect the whole system (global) or a specific partition.
To advance to tier 2 program menus from tier 1 System programming menu, do the following:
1. With the system in program mode and the display showing SYSTEM PROGRAMMING, press # once.
2. The display shows SECURITY., which is the first tier 2 menu.
Shortcut numbers
To go directly to a setting in tier 2, you can enter the shortcut number for that setting. Shortcut numbers in this
manual appear in parentheses, next to the setting name. Menus with partition settings have the series of
shortcut numbers in parentheses. Shortcut numbers can be used from any setting location within tier 2.

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English