GE Security Concord 4 Installation Manual

Chapter 3
Programming
41
Touchpad programming options
In program mode, touchpad buttons let you navigate to all installer programming menus for configuring the
system. Table 8 describes the touchpad button functions in program mode.
Table 8. Touchpad programming functions
Button Programming function
# Select menu item or data entry.
* Deselect menu item or data entry (if pressed before #).
A ()
B ()
Scroll through available options at the current menu tier. Also scroll through sensor text
options during sensor text programming.
C Enter pauses when programming phone numbers.
D Delete certain programmed settings.
0 to 9 Enter numeric values wherever needed.
1 and 2 Select off (1) or on (2) wherever needed.
1 to 6 Press and hold to enter alphabetical characters A through F for account numbers
7 and 9 Press and hold to enter * (7) or # (9) for phone numbers.

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English