GE Security Concord 4 Installation Manual

Concord 4
Installation Manual
166
AVM is interactive (audio session in
progress)
When the central station operator begins listening or
talking to the premises.
011
Fail-to-communicate (panel can’t call CS or
pager)
When the fail-to-communicate output is activated. 012
AVM trip (edge) When an AVM alarm occurs, output is activated
momentarily.
013
Keychain touchpad star button-press When the star button on a keychain touchpad is pressed. 014
Smoke power (for resetting 4-wire smoke
detectors)
Deactivated when hardwire smoke detectors need to be
reset.
015
Exterior siren Activated for police or fire alarms. 016
Interior siren Activation follows all system noises 017
AVM trip (pulse) When an AVM alarm occurs, output is deactivated for 10
ms
018
State of system status Follows the state of system status (ready or trouble). 019
Tamper condition When any tamper is tripped 020
Closing report sent When a closing report has been successfully transmitted
to the central station.
021
Arming to level 1 When the system is disarmed. 022
Group XX in alarm When any sensor in group XX goes into alarm
Sensor XX in alarm When sensor number XX goes into alarm
Sensor XX open When sensor number XX is opened
Table 28. Sensor group event trigger numbers
Sensor group Trigger no. Sensor group Trigger no.
Group 00 in alarm 064 Group 17 in alarm 081
Group 01 in alarm 065 Group 18 in alarm 082
Group 02 in alarm 066 Group 19 in alarm 083
Group 03 in alarm 067 Group 20 in alarm 084
Group 04 in alarm 068 Group 21 in alarm 085
Group 05 in alarm 069 Group 22 in alarm 086
Group 06 in alarm 070 Group 23 in alarm 087
Group 07 in alarm 071 Group 24 in alarm 088
Group 08 in alarm 072 Group 25 in alarm 089
Table 27. System event trigger numbers
System event Description Trigger no.

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English