GE Security Concord 4 Installation Manual

Concord 4
Installation Manual
72
Police panic (0512 to 0562)
Default setting is On.
This setting determines whether touchpad police panic buttons are enabled (on) or disabled (off). To change the
setting, do the following:
1. With the display showing POLICE PANIC OFF/ON (current setting), press 1 (off) or 2 (on).
2. The display flashes the entered setting. Press # and the display shows the new setting.
Keyfob (keychain TP) arm (0513 to 0563)
Default setting is Off.
When this setting is on, pressing the lock button on keyfob arms the system directly to AWAY with No delay.
When this setting is off, each key press increments the arming level (for example, from OFF to STAY, from
STAY t o AWAY).
To change the setting, do the following:
1. With the display showing KEYCHAIN TP ARM OFF/ON (current setting), press 1 (off) or 2 (on).
2. The display flashes the entered setting. Press # and the display shows the new setting.
Star is no delay (0514 to 0564)
Default setting is Off.
This setting determines whether the keyfob star button controls an output (off) or the No delay feature (on).
To change the setting, do the following:
1. With the display showing STAR IS NO DELAY OFF/ON (current setting), press 1 (off) or 2 (on).
2. The display flashes the entered setting. Press # and the display shows the new setting.

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English