Concord 4
Installation Manual
82
Report confirm (06111 to 06611)
Default setting is Off.
When this setting is on, system status speakers announce “Report is okay” followed by a single beep each time
a successful report is made to the central monitoring station. When turned off, no status message or beep
sounds.
To turn the setting off or on, do the following:
1. With the display showing REPORT CONFIRM OFF/ON (current setting), press 1 (off) or 2 (on).
2. The display flashes the entered setting. Press # and the display shows the new setting.
To Next Page
Loading...
