Access control applications
EST3 Installation and Service Manual 3.49
The 3-SAC module supports the SAC bus. Power for the CRC is
normally taken from the 3-PPS/M and is routed with the data
lines in a cable composed of two twisted-pair wires.
SDU programming
If the CRC is to be used for two-person rule it must be
configured in the SDU. On the CRC Configuration tab, the 2
Person Rule box must be checked.
You can also assign a predefined command list to the Access
Denied 2 Person Timeout event. This setting is found on the
CRC Command Lists tab.
To Next Page
Loading...