GE Security EST3 User Manual

Installation
EST3 Installation and Service Manual 5.3
Installation overview
Electrostatic discharge precaution
Observe static sensitive
material handling practices.
The components used in this system are sensitive to electrostatic
discharge (ESD). When handling electronic assemblies, you
must take precautions to avoid the build up of static charges on
your body and on the equipment.
• Do not open the anti
-static packaging until you are ready to
install the electronics.
• Wear a grounded wrist strap to bleed off any static charge
which may have built up on your body.
Energized system precaution
Caution: Never install or remove a module or cabinet
component with power applied to the cabinet.
Circuit compatibility
The following circuit compatibility matrix indicates which
circuit types may occupy the same conduit or be bundled
together, where permitted by code.

GE Security EST3 Specifications

General

Brand	GE Security
Model	EST3
Category	Security Sensors
Language	English